UnderService.Org

General Category => General Discussion => Topic started by: Romero on July 05, 2011, 10:14:54 PM

Title: General Talk
Post by: Romero on July 05, 2011, 10:14:54 PM
Please use this tread for any General talk.
Thank you!
Romero
Title: Re: General Talk
Post by: citfta on July 06, 2011, 02:00:28 AM
Romero,

Thank you for starting this forum.   I am looking forward to whatever you can share with us.  It will be a real pleasure to not have to wade through all the garbage on the other forums to try and find some real info.

Thanks again, Carroll
Title: Re: General Talk
Post by: Romero on July 06, 2011, 08:25:45 AM
@citfta
All other forums are ok too, looks different here because this is new but it can become the same in time.
What I am looking for is that every member that really does replications or any project, to start his  own tread and post any stage of the projects, info, pictures... all.
For many people simple explanation and pictures are showing more than one million words and can be easily understood...
I made this forum mainly for me(backup) and I am not looking to attract people from the other forums, maybe one day this will not exist.
I don't have enough time to maintain it properly and no need for adverts... I hate adverts, slows down a lot.

Best regards,
Romero
Title: Re: General Talk
Post by: landownunder on July 08, 2011, 08:39:00 AM
romero it is with great respect i ask you to lead the way in guiding people with some talent to prove your theories. I myself have no electronics experience, as i was a gravedigger most of my life and am very interested in the free energy movement and have been following the breakthoughs by people like yourself and i would like to see a better world for my children and the only way that will happen is if you could guide/teach people what you know so they can start of with the right knowledge rather than being brainwashed in the electrical way things are supposed to happen. please help anyone that is willing to listen and learn thanks for listening to my comment. I know deep down you did as you said as you have been around for years studying this. thanks again ron from australia
Title: Re: General Talk
Post by: Romero on July 08, 2011, 11:49:08 AM
@landownunder
I am helping in my best possible way.The fact that I am here posting info, pictures and videos shows that.
I believe that doing it this way people will eventually put together all info and build FE devices.
If you look around you will find that are many patents who are Free Energy devices but still not many people replicated them because the info is incomplete, some of them are using too complicated terms for many of us to understand.
This year you will see FE devices on the market, not comming from me but I know what I am talking about.
FE devices that run without external input are not that dificult to build but having them generate lots of extra enery is a big task.
Controlling a device like that looks maybe simple but in reality is a very complicated thing.
If you loop a device like that without having a very reliable controlling will destroy it in seconds, I have seen that with my eyes.
At some point things can go beyond limits and an AUTO KILL button is a must.

Regards,
Romero
Title: Re: General Talk
Post by: keykhin on July 09, 2011, 06:41:07 AM
Hi guys, wanna say hello, i just register and soon I will post some projects, keep in touch, Ovi.
Title: Re: General Talk
Post by: Romero on July 09, 2011, 11:57:37 AM
Hi keykhin , welcome here!

Best regards,
Romero
Title: Re: General Talk
Post by: garrym on July 09, 2011, 02:32:39 PM
I reckon it is way past time to jump ship

I wish wattsup could employ his skills and gather the detail needed to replicate this -



At least it seems more realistic.

Just can't for the life of me figure how Romero got more than a couple of volts from his gen coils. I've obviously
used all the tricks I know of and, short of using multifilar coils to raise the voltage, I just can't get there.

Penno

p.s. That totallyamped site is excellent - very understandable.
Title: Re: General Talk
Post by: Romero on July 09, 2011, 03:29:00 PM
I reckon it is way past time to jump ship

I wish wattsup could employ his skills and gather the detail needed to replicate this -



At least it seems more realistic.

Just can't for the life of me figure how Romero got more than a couple of volts from his gen coils. I've obviously
used all the tricks I know of and, short of using multifilar coils to raise the voltage, I just can't get there.

Penno

p.s. That totallyamped site is excellent - very understandable.
Hi,

as you just said the totallyamped site has a lot of good info, have you achived any of the effects described there?
please do the simple tests first.

Regards,
Romero
Title: Re: General Talk
Post by: garrym on July 09, 2011, 11:20:25 PM
Yes, I have been able to setup a single coil/core that is biased with a magnet at the rear of the core and
been able to get the rotor to speed under load.

In all of hotpoad's detail, he is using coils that can be serialised due to his same number of mags and coils.

With the muller, we can not do this because the coils are out of phase, 9 coils / 8 mags.

Garry (Penno)

Edit :

It's ok, I got it now.

Thanks
Title: Re: General Talk
Post by: Aeon on July 10, 2011, 09:40:22 PM
Hi Folks,
I'm new here in the Forum. Thank's to Romero for doing this. I follow the discussion about Romero's desing for a good while now without any comments but would like to take part now. I'm working on a device quite similar to romero's, will post a video later on.
Regards
Andi
Title: Re: General Talk
Post by: David on July 11, 2011, 10:35:03 PM
I managed to build a small  muller generator with 6 magnets on the rotor and 10 coils, 5 on each side.
I am driving it with just one set of coils.the strange thing is that from each set of coils I get about 7.2 volts then if I connect 2 coils together after the bridge I get 9.8 volts and having them all connected I get 14.4 volts with 1k resistor as load.Why is that? I was expected to have the amps increased not the voltage. Normally if we add 2 or more batteries in parallel we always get the same voltage and increasing only the amperage.Each bridge rectifier I built from 12 1n4007, 3 for each side of the bridge.
Any ideea?

David
Title: Re: General Talk
Post by: Romero on July 11, 2011, 10:51:53 PM
I managed to build a small  muller generator with 6 magnets on the rotor and 10 coils, 5 on each side.
I am driving it with just one set of coils.the strange thing is that from each set of coils I get about 7.2 volts then if I connect 2 coils together after the bridge I get 9.8 volts and having them all connected I get 14.4 volts with 1k resistor as load.Why is that? I was expected to have the amps increased not the voltage. Normally if we add 2 or more batteries in parallel we always get the same voltage and increasing only the amperage.Each bridge rectifier I built from 12 1n4007, 3 for each side of the bridge.
Any ideea?

David
Hi David,

are your coils single wire or multistrand?what core do you use?

Best regards,
Romero
Title: Re: General Talk
Post by: David on July 11, 2011, 11:02:54 PM

I used 4 multifillar  wires connected as tesla style, end of 2 wires  going to the begining of the other 2, separate connection, isolated as you suggested.the core I built as you told me but using soft iron rod.
I get speed under load but I have only one AC cap to test, DC cap is not working.
I will have to order another 3 capacitors but they are expensive and with my money I have to wait for the next week.

David
Title: Re: General Talk
Post by: Romero on July 11, 2011, 11:20:29 PM

I used 4 multifillar  wires connected as tesla style, end of 2 wires  going to the begining of the other 2, separate connection, isolated as you suggested.the core I built as you told me but using soft iron rod.
I get speed under load but I have only one AC cap to test, DC cap is not working.
I will have to order another 3 capacitors but they are expensive and with my money I have to wait for the next week.

David
David, you might need more than 3 capacitors to get it optimal, don't spend the money on them, at least not yet.
If you are short of money don't waste until you are sure the value you need.
I will tell you  how to use DC capacitors running as AC ones.
I am busy right now but I will send u a PM later.

Best Regards,
Romero
Title: Re: General Talk
Post by: garrym on July 12, 2011, 05:53:47 AM
Hi Romero,

First and foremost, I would like to thank you for this wonderful device.

I have for a while been observing that peculiar effect - and have finally adjusted my rig to utilise
components similar, if not identical to yours.

Wondering on the path you had taken to describe to other forum members (initially) how to constrcut such a device,
I feel that maybe you yourself had missed what it is that makes this unit function. Nonetheless, disclosure of this data
can only be made by you.

I have been browsing  the other 3 forums and at this point, do not want to log back in to them - of course, I will
continue to look in.

There is nothing more to add other than a big THANK YOU.

Kindest Regards, Garry
Title: Re: General Talk
Post by: Romero on July 12, 2011, 11:44:02 AM
Hi Romero,

First and foremost, I would like to thank you for this wonderful device.

I have for a while been observing that peculiar effect - and have finally adjusted my rig to utilise
components similar, if not identical to yours.

Wondering on the path you had taken to describe to other forum members (initially) how to constrcut such a device,
I feel that maybe you yourself had missed what it is that makes this unit function. Nonetheless, disclosure of this data
can only be made by you.

I have been browsing  the other 3 forums and at this point, do not want to log back in to them - of course, I will
continue to look in.

There is nothing more to add other than a big THANK YOU.

Kindest Regards, Garry
You are welcome Garry.
There is nothing I discovered, I only collected information from many places and put all info together.
The biggest merit is not mine but all other inventors before us who had nowhere to look at, and used their time and knowledge.
We are privileged to have the internet and search for everything we want, to be able to share and look at pictures, diagrams,... so much.
I would love to be able to discover something myself, something new that has never been discovered before, but that only time will tell.
If you have anything to share, you are the only one who can  decide to share or not, not me, it is all up to you.

Best Regards,
Romero
Title: Re: General Talk
Post by: Aeon on July 12, 2011, 12:18:06 PM


Hi, here is a small video I did some time ago. It shows an Adams motor driving a step motor as a generator. One can see speeding up under load. The Adams is running @ 230V /130 mA (29 W). beside the Adams is a 15W lightbulb driven by the recovering pulses of the motor @240V. The step motor speeds up when connecting a 20W halogen bulb. So OU is very small (only 5W) not enaugh for selfrunning but shows the desired effect very well. Currently I'm working on a model very like Romero's but bigger coils. A DC Motor ist driving it. Using of iron cores is probably an easy way to get good results too. What do you think?
Regards
A.
Title: Re: General Talk
Post by: Romero on July 12, 2011, 12:46:53 PM
@Aeon
I used a stepper motor driven by a pendulum and got good results too.Stepper motors are almost ou anyway.
If you can implement a shorting technique to the stepper you can increase the output even more.
I used for my testing in shorting 4 mosfets in parallel driven by a NE555 and not even syncronised.
A capacitor is a must to the output, try different values until you will find the best one.Don't look for a big capacity.
Capacitors encapsulated in plastic(AC capacitors) and not aluminium case are the best solution, these capacitors are the 'magnet' attracting energy from environement. A home made capacitor is the best but requires a lot of work.
Be careful with that stepper motor if you do shorting on it, the bemf is quite strong and gives a big shock, can be lethal.
Adams motors are running much better when using high voltage.
Try having the bemf from the adams motor connected together with the stepper output, if you can with different timing.

Regards,
Romero
Title: Re: General Talk
Post by: Aeon on July 12, 2011, 07:46:16 PM
@ Romeo
thank's for your reply and the tips. What did you mean about the higher voltage for the Adams? More than the 230V I was using?
I have done tests with up to 320V and indeed the amperage goes down but the extrem high speed of my motor made me fear...
Think I will follow your hint with the stepper. I did many experiments with shorting of the coils, very promising. My first attempt was a small generator with air coils and I found that the capacitors can be under load as long as it stays above the induktion voltage of the coils. I used the generator like a fly wheel and could drive a small Adams with it, very funny stuff.
The capacitor you mean is probably not the Elko,right? I have a big bunch of MKP's and can see that they are much better.
Putting the bemf of the adams into the stepper output seems a good idea but how would you manage a different timing??? The stepper has so many poles that is looks quite difficult to me to find the puls pauses...a wee hint would be much appreciated.
Regards
A.
Title: Re: General Talk
Post by: Romero on July 12, 2011, 10:45:45 PM
@ Romeo
thank's for your reply and the tips. What did you mean about the higher voltage for the Adams? More than the 230V I was using?
I have done tests with up to 320V and indeed the amperage goes down but the extrem high speed of my motor made me fear...
Think I will follow your hint with the stepper. I did many experiments with shorting of the coils, very promising. My first attempt was a small generator with air coils and I found that the capacitors can be under load as long as it stays above the induktion voltage of the coils. I used the generator like a fly wheel and could drive a small Adams with it, very funny stuff.
The capacitor you mean is probably not the Elko,right? I have a big bunch of MKP's and can see that they are much better.
Putting the bemf of the adams into the stepper output seems a good idea but how would you manage a different timing??? The stepper has so many poles that is looks quite difficult to me to find the puls pauses...a wee hint would be much appreciated.
Regards
A.
Around 200 volts is what I meant for the Adams motor.
If you could rotate the stepper motor while is working you can adjust for the best output.You don't need much, you can enlarge the existing holes.
Below are some AC capacitors that are better to be used.Avoid any metal case capacitors in these devices.

Regards,
Romero
Title: Re: General Talk
Post by: EMdevices on July 13, 2011, 09:49:19 PM
David,

This effect is due to AC waveforms and RC time constants, where the load discharges the capacitor between the pulses, and you are measuring the average DC voltage.   

The more pulses per second, the higher the AVERAGE DC VOLTAGE.   If you work with a scope all this will become quite clear to you.

I drew a diagram to show you this visualy.

EM


I managed to build a small  muller generator with 6 magnets on the rotor and 10 coils, 5 on each side.
I am driving it with just one set of coils.the strange thing is that from each set of coils I get about 7.2 volts then if I connect 2 coils together after the bridge I get 9.8 volts and having them all connected I get 14.4 volts with 1k resistor as load.Why is that? I was expected to have the amps increased not the voltage. Normally if we add 2 or more batteries in parallel we always get the same voltage and increasing only the amperage.Each bridge rectifier I built from 12 1n4007, 3 for each side of the bridge.
Any ideea?

David
Title: Re: General Talk
Post by: David on July 14, 2011, 12:28:25 AM
@EMdevices
I had no capacitor in the system and the voltage increased with every bridge connected. All bridges are connected to a 1k resistor, no capacitor.

David
Title: Re: General Talk
Post by: EMdevices on July 14, 2011, 03:05:40 AM
I see, in that case your waveform should resemble a series of positive pulses,  so the more pulses you have, the higher the average DC level your voltmeter will measure.

EM
Title: Re: General Talk
Post by: landownunder on July 15, 2011, 06:58:14 AM
question to romero At one stage a long while ago you made a comment about skycollection being the one to have a break through with a selfrunner. Do you still think he will get there????? or who else should we be watching to make the next breakthrough thanks for all your hard work romero ron ;D ;D
Title: Re: General Talk
Post by: Romero on July 15, 2011, 12:37:15 PM
question to romero At one stage a long while ago you made a comment about skycollection being the one to have a break through with a selfrunner. Do you still think he will get there????? or who else should we be watching to make the next breakthrough thanks for all your hard work romero ron ;D ;D
I was wrong about skycollection, he is trying to do things nice and looking good but after few converstions in private with him I realised he needs much more expertise to get there. From my point of view when I know something, things looks quite easy and believe that being easy everyone would understand. Every device i ever built was simple without complications.
I am not that good to go and play with advanced circuits... that part is for other people.
My advice for all is when decide to build something keep it simple, think simple, like 100 years ago if possible.

Regards,
Romero
Title: Re: General Talk
Post by: scratchrobot on July 16, 2011, 12:59:16 PM
question to romero At one stage a long while ago you made a comment about skycollection being the one to have a break through with a selfrunner. Do you still think he will get there????? or who else should we be watching to make the next breakthrough thanks for all your hard work romero ron ;D ;D
I was wrong about skycollection, he is trying to do things nice and looking good but after few converstions in private with him I realised he needs much more expertise to get there. From my point of view when I know something, things looks quite easy and believe that being easy everyone would understand. Every device i ever built was simple without complications.
I am not that good to go and play with advanced circuits... that part is for other people.
My advice for all is when decide to build something keep it simple, think simple, like 100 years ago if possible.

Regards,
Romero

Thanks for that advice, I do believe you are 100% right and we should try to forget what we already know (not easy) and do our own experiments, don't think that it has already be done but try for yourself and discover new things. Don't google on how to connect a diode but just hook it up and maybe it is wrong but gives better result.

Title: Re: General Talk
Post by: landownunder on July 18, 2011, 02:02:10 PM
Romero You made a statement earlier that we will see overunity by the end of this year. Will what is coming out be of benefit for us all or just big business{oilcompanies} to take over and control who uses it. Or will it be available like a generator for people to buy and use. All info would be very gratefully recieved. thanks ron from the land down under. :) :) :) :)
Title: Re: General Talk
Post by: Romero on July 18, 2011, 04:36:28 PM
Romero You made a statement earlier that we will see overunity by the end of this year. Will what is coming out be of benefit for us all or just big business{oilcompanies} to take over and control who uses it. Or will it be available like a generator for people to buy and use. All info would be very gratefully recieved. thanks ron from the land down under. :) :) :) :)
Hi,
this is what I believe based on some info I have but not only. In my opinion there will be enough info available and most of the people with medium to high understanding in FE devices will be able to replicate.
Time will tell if I am right or wrong :)

Regards,
Romero
Title: Re: General Talk
Post by: garrym on July 20, 2011, 01:44:44 AM
Hi Romero,

Could you please, at least tell us if the coils of a pair should be adding or cancelling (bucking)?

Regards, Garry
Title: Re: General Talk
Post by: Romero on July 20, 2011, 02:06:06 AM
Hi Romero,

Could you please, at least tell us if the coils of a pair should be adding or cancelling (bucking)?

Regards, Garry
Of couse it is bucking, adding will work like a normal coil and mr Lenz will beat us hard.
May I ask you something, as it is considered fake why do you continue working on it?
Romero
Title: Re: General Talk
Post by: garrym on July 20, 2011, 04:51:58 AM
Hi Romero,

Thanks for that.

The reason I continue to work on this is -

Early on, I asked if you were religious and I passed the comment - GOD BLESS YOU.
You responded that you were Orthodox Christian and that is more than good enough for me.

Keep well and ignore those that try to derail you.

As my mum says, the truth will eventually be know. Patience and Honesty will never fail you or anyone.


Garry
Title: Re: General Talk
Post by: landownunder on July 20, 2011, 05:27:17 AM
amen to that gary in full agreement with you. good luck and god bless you and romero ron
Title: Re: General Talk
Post by: scratchrobot on July 20, 2011, 03:38:05 PM
Hi Romero,

Thanks for that.

The reason I continue to work on this is -

Early on, I asked if you were religious and I passed the comment - GOD BLESS YOU.
You responded that you were Orthodox Christian and that is more than good enough for me.

Keep well and ignore those that try to derail you.

As my mum says, the truth will eventually be know. Patience and Honesty will never fail you or anyone.


Garry

I don't think that you can trust somebody only because he is Orthodox Christian or whatever... that's just BS.
The reason I continue to work on this is because I belief that it can be done and I don't think Romero is a person who would faked it.
Title: Re: General Talk
Post by: scratchrobot on July 20, 2011, 09:06:36 PM
Hi Romero,

Could you please, at least tell us if the coils of a pair should be adding or cancelling (bucking)?

Regards, Garry
Of couse it is bucking, adding will work like a normal coil and mr Lenz will beat us hard.
May I ask you something, as it is considered fake why do you continue working on it?
Romero

To me it was also not clear how to use the coil pair, the thing is that in bucking I get speedup but I can not charge the caps  :(

Edit, Maybe we can  :)
http://underservice.org/index.php?topic=11.msg218#msg218 (http://underservice.org/index.php?topic=11.msg218#msg218)

Regards
Title: Re: General Talk
Post by: Hitman on July 21, 2011, 05:14:00 AM
Quote
Edit, Maybe we can  :)
http://underservice.org/index.php?topic=11.msg218#msg218 (http://underservice.org/index.php?topic=11.msg218#msg218)

Regards
Maybe you could amplify the effect by winding 2 bi-filer coils in the same configuration.
:)

Oh btw Konehead posted this:
Quote
"Kone,

 chalamadad  posted this BH curve pic,  but he does not have it quite right..............

The Knee of the B/H curve,  real close to saturation,  the Non Linear region  is what they want to tweek the bias magnets strength and distance,  to bias's the core to.   
So that the cores can just make the Polarity flip flop back and forth between stable points before the Knee,  and after the Knee,  between non saturation in one polarity, and  full saturation in the other polarity, Very  Very Fast,  with a certain rotor magnet strength / gap, etc,  to modulate the flip flop between those 2 Polarity's points on the core's BH curve....

This is kind of like a Mag Amp, using magnets to do the BH bias, vs  DC coils on the core to do the BH bias

 Very Very Fast Polarity Flipping,  makes for Higher Voltages output too"
(http://w2.itawk.com:8080/images/RSromerocoreflipping.png)

Regards Hitman
Title: Re: General Talk
Post by: scratchrobot on July 21, 2011, 11:54:41 AM
Hi Romero,

Could you please, at least tell us if the coils of a pair should be adding or cancelling (bucking)?

Regards, Garry
Of couse it is bucking, adding will work like a normal coil and mr Lenz will beat us hard.
May I ask you something, as it is considered fake why do you continue working on it?
Romero

It is considered fake because of this picture and I must say that to me it also looks like there are going 2 wires trough the hole in the table  :o maybe it is an illusion?
Title: Re: General Talk
Post by: scratchrobot on July 21, 2011, 07:50:22 PM
Quote
Edit, Maybe we can  :)
http://underservice.org/index.php?topic=11.msg218#msg218 (http://underservice.org/index.php?topic=11.msg218#msg218)

Regards
Maybe you could amplify the effect by winding 2 bi-filer coils in the same configuration.
:)

Oh btw Konehead posted this:
Quote
"Kone,

 chalamadad  posted this BH curve pic,  but he does not have it quite right..............

The Knee of the B/H curve,  real close to saturation,  the Non Linear region  is what they want to tweek the bias magnets strength and distance,  to bias's the core to.   
So that the cores can just make the Polarity flip flop back and forth between stable points before the Knee,  and after the Knee,  between non saturation in one polarity, and  full saturation in the other polarity, Very  Very Fast,  with a certain rotor magnet strength / gap, etc,  to modulate the flip flop between those 2 Polarity's points on the core's BH curve....

This is kind of like a Mag Amp, using magnets to do the BH bias, vs  DC coils on the core to do the BH bias

 Very Very Fast Polarity Flipping,  makes for Higher Voltages output too"
(http://w2.itawk.com:8080/images/RSromerocoreflipping.png)

Regards Hitman

Thanks for the info, I tried Bifliair and it gives even better output  :)
http://underservice.org/index.php?topic=11.msg221#msg221 (http://underservice.org/index.php?topic=11.msg221#msg221)

Regards,
scratchrobot
Title: Re: General Talk
Post by: garrym on July 22, 2011, 10:21:11 AM
Hi Romero,

For each pair set, which of these four parameters is more critical ( that is to have equal for the two coils of a pair)
 to aid in our final outcome -

1. Resistance
2. Inductance
3. Capacitance
4. Turns

Kindest Regards, Garry

p.s. It has only take 3 months, but I finally understand what you mean by "tuning is an mammoth task"

Title: Re: General Talk
Post by: Aeon on July 23, 2011, 10:41:15 PM
Hi there,
I'm playing around with a generator like Romero's, just the coils and cores are a wee bit different (soft iron cores). When i shorten the coils I can see a dramatic increase of rpm and the amperage is dropping extremely. The input is a good bit higher before I get the needed rpm's. I can see now very well what you mean by tuning the air gap, Romero. The mechanical resistance increases a lot when I get too close to the cores and the output decreases too much when I'm to far away - but funny enough: even at a gap of 12mm I get 25V out. Shorting amperage is 450 mA at that gap, not too bad ;) Will have to finish that generator before I'm able to tell the exact output/input duty, might be a quite good cop. Shorting of the coils can be done vice versa: Keep them shorted all the time and open the switch to get the spikes (like in a ignition coil of a cumbustion motor) Very high voltage, careful.....
good luck to everybody
Andi
Title: Re: General Talk
Post by: darkwanderer on July 24, 2011, 07:06:58 AM
but funny enough: even at a gap of 12mm I get 25V out. Shorting amperage is 450 mA at that gap, not too bad ;)

Wow that's something... you got 12mm gap and you have 25 volt output  :o Can you give more info like the size of magnet's, the dynamo properties etc...

Regards...
Title: Re: General Talk
Post by: Aeon on July 24, 2011, 10:09:48 PM
hi darkwanderer,
try this coil: magnet wire .8mm, 42 mm long, od 30mm (don't know the number of windings, is not critical). Core is a 8mm steel screw, 90mm long. I have turned the head somewhat down to 12mm dia and 5mm thickness in the lathe. My Rotor is probably like Romero's (Think it is 20cm in diameter where the Magnets are sitting) Poles are NS. I used 16 mags instead of 8, so the higher frequency allows to see the dropping of input at lower rpm's. My driver motor is a simple DC motor (24V), quite strong but draws only 3W when idling. Turns 3000 rpm @24V.
Funnywise that steel core did not get hot.....as long as the air gap is bigger than 5mm. I was amased to see 5W coming out of it with the big gap of 10mm, did'nt expect so much. Voltage is allways good but amperage drops a lot when you increase the gap too far. Not too difficult to get a wee bit OU here.
Regards
A
Title: Re: General Talk
Post by: landownunder on July 26, 2011, 02:40:36 PM
Below are a couple of links that would be very interesting to experimentors. Hope you enjoy, i found them unusual. ron





Title: Re: General Talk
Post by: garrym on July 26, 2011, 11:45:30 PM
Hi Romero,

May I please have an answer to the following -

For each pair set, which of these four parameters is more critical ( that is to have equal for the two coils of a pair)
 to aid in our final outcome -

1. Resistance
2. Inductance
3. Capacitance
4. Turns


If this is asking too much or giving away the key, I will understand. But at least may I have a response?

Kindest Regards, Garry
Title: Re: General Talk
Post by: scratchrobot on July 27, 2011, 12:35:34 PM
Hey Romero can you please give me your opinion on the picture I posted, can you see the 2 wires going down the table cap?
Title: Re: General Talk
Post by: thaelin on July 27, 2011, 05:34:44 PM
Scratch:
   You have me curious too now. Are you Wattsup with a new user name?
That was beat up over there, why not leave it there..................
If you keep pushing, he will not help anyone at all.

thay
Title: Re: General Talk
Post by: scratchrobot on July 28, 2011, 04:21:01 PM
Scratch:
   You have me curious too now. Are you Wattsup with a new user name?
That was beat up over there, why not leave it there..................
If you keep pushing, he will not help anyone at all.

thay

I'm not Wattsup, who are you?
I did not bring this up, Romero did. I just asked simple question about what i see in video what is the problem?
I asked once so i don't think i'm pushing but i will leave it then since nobody wants to answer, lets pretend the picture does not exist then okay.

scratchrobot
Title: Re: General Talk
Post by: Romero on July 29, 2011, 08:35:37 PM
@scratchrobot
If you believe that picture is proof of a fake you are welcome not to follow.I am not inviting anyone to follow, better relax and watch then later when you are sure 100% you can totally ignore or try it  yourself.
This forum is for people to post their work, info and pictures.
Do you prefer people to stop posting?

Regards,
Romero
Title: Re: General Talk
Post by: garrym on July 29, 2011, 11:09:45 PM
May be persistence but -

Hi Romero,

May I please have an answer to the following -

For each pair set, which of these four parameters is more critical ( that is to have equal for the two coils of a pair)
 to aid in our final outcome -

1. Resistance
2. Inductance
3. Capacitance
4. Turns


If this is asking too much or giving away the key, I will understand. But at least may I have a response?

Kindest Regards, Garry
Title: Re: General Talk
Post by: scratchrobot on July 30, 2011, 02:45:39 AM
@scratchrobot
If you believe that picture is proof of a fake you are welcome not to follow.I am not inviting anyone to follow, better relax and watch then later when you are sure 100% you can totally ignore or try it  yourself.
This forum is for people to post their work, info and pictures.
Do you prefer people to stop posting?

Regards,
Romero

I don't know what to belief  :-\ I'm not saying it is proof of a fake but I see two wires going down the umbrella cap  :o
I have not come here to argue with anyone but to share my experiments and learn from other people like you because I think it can be done.
I just asked you if you can see or remember the two wires on the video, if you don't see them in the screenshot than that's okay.
I don't know what you mean by people stop posting, why should they stop posting?

Regards,
scratchrobot
Title: Re: General Talk
Post by: Romero on July 30, 2011, 08:32:57 AM
May be persistence but -

Hi Romero,

May I please have an answer to the following -

For each pair set, which of these four parameters is more critical ( that is to have equal for the two coils of a pair)
 to aid in our final outcome -

1. Resistance
2. Inductance
3. Capacitance
4. Turns


If this is asking too much or giving away the key, I will understand. But at least may I have a response?

Kindest Regards, Garry
each one is important.when i built it I have not considered all these but later after lots of experimenting I realised the importance of each one.I don't have a formula, any coil can be built to behave but all in relation with other aspects, rpm, coil gap, magnet type,...
The coil itself is the most important but even with a perfect coil you get nothing unless all other parameters are correct.

Romero
Title: Re: General Talk
Post by: Romero on July 30, 2011, 08:42:35 AM
@scratchrobot
I get a lot of requests to stop posting...   I am posting my work and if is considered fake it is so easy not to visit the website. I am not making money or anything from all this posting.
Most of the people should not try to replicate until someone better than me can understand it and make it more clear.There are few people who are close enough.

Regards,
Romero
Title: Re: General Talk
Post by: garrym on July 30, 2011, 10:04:29 AM
Hi Romero,

Thank you for the reply.

Garry
Title: Re: General Talk
Post by: garrym on July 30, 2011, 02:30:50 PM
Hi Romero,

Tonight I spent sevveral hours combing through the Shorting Coil thread over at OU.

From an early post you wrote -

I have discovered a new way to do the switching without the reed, it is with only one extra component that does the switching... it is amazing... I have to understand it a bit more then I will talk abut it more.

What is this extra component ?

Somehow I feel the key is close.

Regards, Garry
Title: Re: General Talk
Post by: scratchrobot on July 30, 2011, 02:38:27 PM
Hi Romero,

Tonight I spent sevveral hours combing through the Shorting Coil thread over at OU.

From an early post you wrote -

I have discovered a new way to do the switching without the reed, it is with only one extra component that does the switching... it is amazing... I have to understand it a bit more then I will talk abut it more.

What is this extra component ?

Somehow I feel the key is close.

Regards, Garry

Yes I also would like to know, was it the FWBR?

Regards,
scratchrobot
Title: Re: General Talk
Post by: landownunder on August 01, 2011, 04:10:14 AM
romero would like your views on how you think toranarod is going do you think he is very close??????? thanks for any input ron ;D ;D ;D ;D
Title: Re: General Talk
Post by: garrym on August 09, 2011, 02:31:15 PM
Come on Romero,

Please let us know what that one additional component is.

Regards, Garry
Title: Re: General Talk
Post by: Romero on August 14, 2011, 09:44:44 AM
romero would like your views on how you think toranarod is going do you think he is very close??????? thanks for any input ron ;D ;D ;D ;D
i had no time to read and follow any of the late posts.No OU study until end of the month.
the shorting component I discovered initialy was replaced by the way the coil pairs are constructed
Regards,
Romero
Title: Re: General Talk
Post by: garrym on August 14, 2011, 02:30:03 PM
Romero,

Thank you.

Garry
Title: Re: General Talk
Post by: landownunder on August 15, 2011, 04:54:31 AM
Romero thank you, hope all is well with you as no posts for a while. You all may be interested in bill mehess on overunity will release a solid state energy device with no input at all and give of power and is scalable hope this is of interest to you and your members and guests thanks again for your hard work. ron
 

Penno I wish you well with your work on romeroes device sooner or later you will succeed, i hope romero will give u some baby steps in the right direction.
Title: Re: General Talk
Post by: DeepCut on August 26, 2011, 07:30:51 PM
Hi all,

just joined the forum and looking forward to sharing.

I am a moderator at http://www.overunity.org.uk

I am about to embark on the small tests referred to on totallyamped.net.

The guy who does my CNC cutting for me is on holiday for two weeks from today, does anyone know of a good and reasonably priced CNC cutting service in the UK ?


Cheers,

Gary.
Title: Totally Amped ..
Post by: DeepCut on August 26, 2011, 08:04:46 PM
On page 11 of this article :

http://www.totallyamped.net/adams/index.html

He describes what he thinks is going on in the speed-under-load effect.

I'm fairly new to electronics (1 year) but i think i understand it, but i would like someone to confirm my understanding.

Is he basically saying that the RPM of the rotor has a critical window of opportunity where the magnet passes the gen-coil fast enough to beat the rise-time of the BEMF in the gen-coil's core ?

Also, we want to do this at lower RPM's, therefore we need higher impedance coils.

Higher impedance imples higher inductance and higher inductance (according to the formula) requres short, wide coils with many turns ?


Cheers,

Gary.
Title: Re: Totally Amped ..
Post by: Romero on September 04, 2011, 11:13:39 AM
On page 11 of this article :

http://www.totallyamped.net/adams/index.html

He describes what he thinks is going on in the speed-under-load effect.

I'm fairly new to electronics (1 year) but i think i understand it, but i would like someone to confirm my understanding.

Is he basically saying that the RPM of the rotor has a critical window of opportunity where the magnet passes the gen-coil fast enough to beat the rise-time of the BEMF in the gen-coil's core ?

Also, we want to do this at lower RPM's, therefore we need higher impedance coils.

Higher impedance imples higher inductance and higher inductance (according to the formula) requres short, wide coils with many turns ?


Cheers,

Gary.
The RPM has not only one critical window where the speed up takes place, in my experimenting I found more windows for that, all depending of the coil and other components. The magnet behind the coil will change the inductance and that can help too.
As for now I cannot see anyone having speed under load with a magnet behind the coil...

Regards,
Romero
Title: Re: General Talk
Post by: landownunder on September 05, 2011, 02:00:39 PM
Hi romero  Looks like toranarod is starting to understand your break through a bit more have a look at this link. Wish you all the best with your experiments romero, but i think you are well ahead of where they are i wish you could guide them a little more. all the best ron

LINK :   http://www.energeticforum.com/renewable-energy/7982-muller-generator-replication-romerouk-51.html




Title: Re: General Talk
Post by: Romero on September 05, 2011, 04:57:54 PM
Hi romero  Looks like toranarod is starting to understand your break through a bit more have a look at this link. Wish you all the best with your experiments romero, but i think you are well ahead of where they are i wish you could guide them a little more. all the best ron

LINK :   http://www.energeticforum.com/renewable-energy/7982-muller-generator-replication-romerouk-51.html
Hi,
 toranarod has a good progress and for now he is second in my list who has started to understand more of these effects.
I have just returned from holiday and I will start working again on my current project and some other small toys experimenting new ideas.

One small tip for all who are working on speed under load, if you understand what I mean that can help a lot:
  every coil has an inductance but when the rotor with the magnet is in front of the coil the inductance is changed. Think of a system to keep the coil natural inductance when the rotor magnet is in front of the coil.

Best regards and success all,
Romero
Title: Re: General Talk
Post by: Hitman on September 05, 2011, 05:58:32 PM
Hi all,
@ romero I've been using a SSG to power my rotor and noticed that when the coil is self resonating and the magnet from the rotor passes in front of it, the resonant frequency changes. So what you are saying is to use a backing magnet to stop the change in frequency correct ?

Hummmm that might be a good way to tune a coil (maybe)
Regards Hitman.
Title: Re: General Talk
Post by: Romero on September 05, 2011, 06:03:47 PM
Hi all,
@ romero I've been using a SSG to power my rotor and noticed that when the coil is self resonating and the magnet from the rotor passes in front of it, the resonant frequency changes. So what you are saying is to use a backing magnet to stop the change in frequency correct ?

Hummmm that might be a good way to tune a coil (maybe)
Regards Hitman.
Hi,

Using a backing magnet that is not right will not help, you must try and see.

Romero
Title: Re: General Talk
Post by: Hitman on September 06, 2011, 05:03:59 PM
Hi again,
Your right romero, all it did was make the effect vanish.

Regards Hitman

WOW !!!! I think I've got it :)
Went back to thinking simple as romero suggested and got rid of a few things, reed switch, mosfets, caps and replaced it with a FWBR and a 1uf 300V AC cap.

Scope shot #1 is using a rotor with 8 magnets all facing north.
#2 has a rotor with 31 magnets NSNS arrangement.
#3 is a close up of the 2nd.

Oh and before I forget, I can short out the coil with no effect to the rpm's.

Cheers I'm going to have a beer.....
Regards Hitman
Title: Re: General Talk
Post by: DeepCut on September 12, 2011, 12:12:58 PM
Nice one Hitman :)
Title: Re: General Talk
Post by: DeepCut on September 12, 2011, 12:20:24 PM
This guy is getting acceleratoin under load with no helper magnets and no secret ways of helping a magnet keep it's natural induction :

&feature=related

Romero, when you have the time, just tell us a few things straight rather than keeping us guessing ?

We have all been second-guessing famous guys that have been dead for years, you are alive so please give specifics and not vague explanations, thankyou :)
Title: Re: General Talk
Post by: Romero on September 12, 2011, 02:38:12 PM
This guy is getting acceleratoin under load with no helper magnets and no secret ways of helping a magnet keep it's natural induction :

&feature=related

Romero, when you have the time, just tell us a few things straight rather than keeping us guessing ?

We have all been second-guessing famous guys that have been dead for years, you are alive so please give specifics and not vague explanations, thankyou :)
There are things I cannot explain, some because I cannot and some because I cannot understand them even myself.
Watching Mariuscivic videos should be enough for most of you to get the effect, there is not a secret anymore.
The system as is now is not very reliable as I said many times before, it needs readjusting when the load is changed and we loose the effect totally. I am doing more experiments to be able to avoid some of the problems. I have nothing to show yet as some of the parts for the new device are not ready. I have already changed the structure for the new build after a disaster (broken parts) while some testing where the speed was too high.
I am recommending everyone to be very careful and avoid usage at very high speed.
The effect can be replicated even with lower speeds if the coil is right.
I have no formula to calculate the proper coil, just a lot of work winding many times, adding or removing turns....
Any coil can speedup the system if the rpm is right.
Get the speed effect with a  coil then check the rpm where you notice the effect is starting and after that add or remove about 10-50 turns. Check again RPM and based on that you know if you need to get up or down with the number of turns.
When you are happy with the rpm then you can think of the other coils.
Adding more coils in the system will change everything, coils that were working ok before are not going to behave the same...
For that is better to have the coils built with many taps at different number of turns.That can help a lot in tunning all coils.
It is painful and requires lots of time and patience.
The core can be almost any type but normal iron based are going to get hot very quick when tunning is complete.
Another suggestion for the Muller type is to have the top and the bottom coil not in perfect line.

Best regards,
Romero
Title: Re: General Talk
Post by: DeepCut on September 13, 2011, 09:43:40 AM
OK i understand, thankyou for telling us what you can :)
Title: Re: General Talk
Post by: Hitman on September 23, 2011, 12:21:33 AM
Hey romero check this out:
Title: Re: General Talk
Post by: Romero on September 23, 2011, 01:44:15 AM
Hey romero check this out:

Hi,
i have seen it already... the game is still on.

Romero
Title: Re: General Talk
Post by: landownunder on September 23, 2011, 06:49:28 AM
Hey romero is zero on the right track. When you get another self runner will you share again even though you were treated badly the first time. all the best to everyone ron
Title: Re: General Talk
Post by: Romero on September 23, 2011, 09:06:43 AM
Hey romero is zero on the right track. When you get another self runner will you share again even though you were treated badly the first time. all the best to everyone ron
This new project I hope will not upset anyone.
 I am going to have a public demonstration when I will have it ready. No more selfrunning, that will upset many people, just a motor/generator.

Regards,
Romero
Title: Re: General Talk
Post by: Hitman on September 26, 2011, 04:00:52 PM


Hitman
Title: Re: General Talk
Post by: Romero on September 26, 2011, 06:11:43 PM


Hitman
Thank you Hitman, I have already saw it. I have done that experiment long ago using a chopper transformer and had similar results.I was using about 23khz.

Romero
Title: Re: General Talk
Post by: landownunder on September 28, 2011, 05:58:22 AM
This is another video of youtube from one of the guys at overunity, hope it helps to understand some more of the secret to free energy. all the best ron.
Title: Re: General Talk
Post by: free_nrg on September 28, 2011, 08:50:56 PM
Self runner http://www.energeticforum.com/renewable-energy/9411-neat-little-motor-generator.html
Title: Re: General Talk
Post by: landownunder on October 14, 2011, 02:00:06 AM
@ romero would you please explain what you are hoping to achieve with your latest toy. Thanks ron good luck with your experiments sir
Title: Re: General Talk
Post by: Romero on October 14, 2011, 11:23:10 AM
@ romero would you please explain what you are hoping to achieve with your latest toy. Thanks ron good luck with your experiments sir
I have nice and good hopes but I need them confirmed.
Nothing yet but my hopes are still intact.
I am tired after my day to day job and I cannot alocate too much time for my toys but I am on the right track.

Romero
Title: Re: General Talk
Post by: landownunder on October 14, 2011, 02:35:33 PM
@romero what are your nice and good hopes if you don't mind. Whether you confirm them or not was just wondering what you expect out of your toy. a full explanation would be appreciated please ron
Title: Re: General Talk
Post by: Romero on October 14, 2011, 04:16:07 PM
@romero what are your nice and good hopes if you don't mind. Whether you confirm them or not was just wondering what you expect out of your toy. a full explanation would be appreciated please ron
I am expecting to have a very efficient motor/generator. OU is not the word I should use and I think nobody should.
A full explanation I can have after I will evaluate all my options but not now.

Romero
Title: Re: General Talk
Post by: landownunder on October 19, 2011, 06:19:28 AM
@romero How are your tests going on the new toy. hope it is going as you hoped it would. well the year is getting close to being over and still no one has released a self runner or free energy machine hopefully someone will soon. all my best wishes ron
Title: Re: General Talk
Post by: Romero on October 20, 2011, 09:02:34 AM
@romero How are your tests going on the new toy. hope it is going as you hoped it would. well the year is getting close to being over and still no one has released a self runner or free energy machine hopefully someone will soon. all my best wishes ron
Hi,

tests are going ok. I had to take it apart few times to change different things.

I said that a free energy device is going to be available and I still believe will be, wait and see.

Romero
Title: Re: General Talk
Post by: landownunder on October 20, 2011, 02:11:55 PM
@romero thank you for the reply and i hope you are right, a free energy device would benefit so many and upset the few. As the latest slogan goes we are the 99% but are controlled by the 1 %.  Let us hope things will change for the better. all the best ron
Title: Re: General Talk
Post by: landownunder on October 24, 2011, 02:31:47 PM
@ romero Hope all is good would be interested in knowing when are you going to release another exciting video about your toys and how well they are performing. all the best ron
Title: Re: General Talk
Post by: Romero on October 26, 2011, 05:16:24 PM
@ romero Hope all is good would be interested in knowing when are you going to release another exciting video about your toys and how well they are performing. all the best ron

Hi,
I have nothing new to show in a new video. I am still working on different things. I have fixed the rotors vibration and now I am working on electronic controller, timing,... .I am also spending some time in trying to replicate 'stivep and the group'  Kapanadze replica, also I have one small baby generator I am working on with only 3mm dia magnets.Time is not enough but I am alocating most of it for these experiments.


Regards,
Romero
Title: Re: General Talk
Post by: landownunder on October 31, 2011, 08:36:48 AM
Hope everybody is good just like to hear what you all think of the kapanadze device on youtube from stivep. would like to know whether you agree or not. all the best ron
Title: Re: General Talk
Post by: landownunder on November 25, 2011, 07:52:19 AM
@ romero how is the stivep group replication going are you getting any effects at all. thanks Ron
Title: Re: General Talk
Post by: Romero on November 25, 2011, 02:24:21 PM
@ romero how is the stivep group replication going are you getting any effects at all. thanks Ron
Hi,

I  tried everything and no success with that setup. The yoke used there might be different or the information we have is incomplete.
It works fine like inverter but the high voltage does not help, I managed to blow my NST while playing with this experiment. I have just ordered another one, good price for people interested to buy one: http://www.ebay.co.uk/itm/NEON-LIGHT-POWER-SUPPLY-CONVERTER-220-240V-100W-50HZ-/160680524399?pt=UK_ConsumerElectronics_PowerAdaptors_SM&hash=item25694e3a6f

Regards,
Romero
Title: Re: General Talk
Post by: DeepCut on December 15, 2011, 04:13:05 PM
Hi Romero,

any chance you could do a video or a diagram of how to remove the ground fault interrupt ?


Cheers,

DC.
Title: Re: General Talk
Post by: Romero on December 16, 2011, 05:58:27 PM
Hi Romero,

any chance you could do a video or a diagram of how to remove the ground fault interrupt ?


Cheers,

DC.
Hi deepcut,

I am affraid I don't understand your question... can you reformulate?

Romero
Title: Re: General Talk
Post by: Hitman on December 28, 2011, 05:22:28 AM
I found this rather interesting.


Cheers Hitman
Title: Re: General Talk
Post by: landownunder on December 31, 2011, 02:13:06 PM
HAPPY NEW YEAR EVERYONE ALL THE BEST FROM AUSSIE ron It is already 2012 down here so hope you guys have a great one


Title: Re: General Talk
Post by: landownunder on January 06, 2012, 02:04:01 PM
Very interesting video about caps doubling in power well worth watching maybe some of the knowledgeable ones may comment on what is happening  all the best ron

link
Title: Re: General Talk
Post by: Hitman on January 12, 2012, 06:42:37 PM
Hi all,

Was looking at a joule theif circuit and trying to visualize the flow of electrons and I couldn't explain why a LED would light up unless there was some sort of electron movement back towards the positive. I'm a very visual person so I made this animation.

http://www.itawk.com/electronFlow.html
(hummm, can't embed stuff)

and heres the basic sechmatic.

Cheers Hitman
Title: Re: General Talk
Post by: Romero on January 12, 2012, 08:48:25 PM
nice one Hitman !

Romero
Title: Re: General Talk
Post by: Hitman on January 24, 2012, 07:48:11 PM
Have u guys seen this ?
Title: Re: General Talk
Post by: Wings on January 24, 2012, 08:40:22 PM
 :)
http://jnaudin.free.fr/html/afep01.htm
http://jnaudin.free.fr/html/afep012.htm
http://jnaudin.free.fr/html/fep01.htm
Title: Re: General Talk
Post by: Romero on January 25, 2012, 01:36:15 AM
:)
http://jnaudin.free.fr/html/afep01.htm
http://jnaudin.free.fr/html/afep012.htm
http://jnaudin.free.fr/html/fep01.htm
I have done that experiment long time ago, it works good and very simple to be replicated

Romero
Title: Re: General Talk
Post by: landownunder on January 25, 2012, 04:15:35 AM
Check this one out romero and guys self runner using caps all the best ron

Title: Re: General Talk
Post by: Romero on January 25, 2012, 03:56:38 PM
Check this one out romero and guys self runner using caps all the best ron


extra energy coming from external magnets in the driving motor stator, not to complicated, I am sure it works.
Check my schematic posted some time ago http://underservice.org/index.php?action=dlattach;topic=3.0;attach=368
Title: Re: General Talk
Post by: Romero on February 02, 2012, 01:51:27 PM
Hi romero here is a message from tito on overunity for you in case you missed it

@romerouk
                    just in case your reading here.
                   ok for the world please tell what dave45 has notice, ok if you will tell i will tell also ok?
                   i know you know what i mean   ;)   ;D


all the best ron
be interested to hear what he and you have noticed or come up with??????
Hi,
I really don't understand his question....????
can you paste the link from ou.com?

Regards,
Romero
Title: Re: General Talk
Post by: Hitman on February 02, 2012, 10:31:32 PM
Holy F**K !!!!!
I just got my oil tank filled cause my furnace was putting out cold air and the tank indicator read empty. When the dude brought me the bill I nearly passed out !!!!!  $970.25cdn OH MY FREAK'IN NERVES.
We need to figure out something to heat the house with soooooon.

As romero says:
Success everyone !

Hitman
Title: Re: General Talk
Post by: Romero on February 03, 2012, 12:15:07 AM
Holy F**K !!!!!
I just got my oil tank filled cause my furnace was putting out cold air and the tank indicator read empty. When the dude brought me the bill I nearly passed out !!!!!  $970.25cdn OH MY FREAK'IN NERVES.
We need to figure out something to heat the house with soooooon.

As romero says:
Success everyone !

Hitman
Earth weather is changing fast and we will need more heat for the winter and more cooling for the summer. Hard times are comming...

Romero
Title: Re: General Talk
Post by: Hitman on February 03, 2012, 04:14:07 AM
The 3 items that consume the most energy in a household are hot water, environment temperature control and refrigeration.
About 8 years ago I experimented with Stanley Myers water electrolsis devices and at the end I was able to power a chain saw motor with water only but only at a major cost in power. The thing drew 40amps at 12volts 480watts, now if you compare that with a normal 220v electrical heater that usually consumes about 1000watts/heater (I have 4 of these in my home plus an oil furnace), I'll bet I could make the same amount of BTU's as a normal 220v electrical heater, only using Hydrogen implosion.

I think I read on the Bedini forums once that someone had put a coil on the primary input of an electrolizer and got amazing results, makes sense ! water electrolzers are basically "Capacitors" couple it with a coil and you have a tank circuit. Just imagine if you could tune your electrolizer and coil to the same frequency as the plates in your electrolsis device.

I must do more work with these devices in fear of having to refill my furnace tank !!

Cheers Hitman
Title: Re: General Talk
Post by: Hitman on February 03, 2012, 05:24:53 PM
@romero,
I think your forum is being hacked !!
Title: Re: General Talk
Post by: Romero on February 03, 2012, 06:20:04 PM
@romero,
I think your forum is being hacked !!
why that? I posted the videos under Fun and Entertaining, sometimes we need to feel good and I am feeling good today.

Best regards,
Romero
Title: Re: General Talk
Post by: Hitman on February 03, 2012, 09:31:14 PM
I thought someone hacked your account and posted all of those, kinda like last week or so all those screwed up posts. Guess I'll look at them since YOU posted them :)

Cheers its Friday !!!!!  8)
Hitman
Title: Re: General Talk
Post by: Hitman on February 09, 2012, 12:24:55 AM
Hi all,

Electric cars :)

http://www.movie2k.to/Revenge-of-the-Electric-Car-watch-movie-1184530.html

Cheers
Hitman
Title: Re: General Talk
Post by: landownunder on February 14, 2012, 09:04:03 AM
Hi Romero and guys check this out
Overunity eventually????

&list=UUreJcMjYx-ovTpN4MomNNtw&index=1&feature=plcp

Title: Re: General Talk
Post by: landownunder on March 28, 2012, 02:17:58 PM
OVERUNITY ?????? TAKE A LOOK

ind
Title: Re: General Talk
Post by: Hitman on March 28, 2012, 06:29:31 PM
I'd be interested in seeing voltage and amperage readings using analog meters.

Cheers Hitman
Title: Re: General Talk
Post by: landownunder on April 07, 2012, 03:11:32 PM
Another interesting video from tinman  high voltage in water maybe one of you can explain what is happening???

&feature=plcp&context=C4fd39f3VDvjVQa1PpcFOHNbFeKim6EHrr3PZ8dJ7a9xb373NuFDY%3D
Title: Re: General Talk
Post by: landownunder on April 11, 2012, 02:20:26 PM
No comments about last video maybe this one will interest some of you it is about the gabriel device more out than in.

Title: Re: General Talk
Post by: crazycut06 on April 28, 2012, 05:30:21 PM
Hi Romero,
    The post at the topic space threat a few days ago with garbled characters, was that a virus? Did you removed it? Thanks It's gone now, that was annoying...
Title: Re: General Talk
Post by: Romero on April 28, 2012, 11:57:18 PM
Hi Romero,
    The post at the topic space threat a few days ago with garbled characters, was that a virus? Did you removed it? Thanks It's gone now, that was annoying...
There are a lot of attacks to the site every day, I need to keep cleaning....

Romero
Title: Re: General Talk
Post by: landownunder on July 13, 2012, 02:19:18 PM
GOOD evening romero and all this link is creating a lot of interest on energetic forum check it out woopy is on board and experimenting overunity you decide

&feature=youtu.be


all the best ron  go to his youtube account for more info quite interesting

Title: Re: General Talk
Post by: Romero on July 13, 2012, 11:26:24 PM
GOOD evening romero and all this link is creating a lot of interest on energetic forum check it out woopy is on board and experimenting overunity you decide

&feature=youtu.be


all the best ron  go to his youtube account for more info quite interesting
Very interesting motor, thank you!

Regards,
Romero
Title: Re: General Talk
Post by: Hitman on July 14, 2012, 02:22:04 PM
GOOD evening romero and all this link is creating a lot of interest on energetic forum check it out woopy is on board and experimenting overunity you decide

&feature=youtu.be


all the best ron  go to his youtube account for more info quite interesting

Hi landownunder, I've been watching his yt channel for awhile and heres the orignal video on how his asymmetrical motor works. I don't think this is OU but I'm pretty sure his COP is much better, I will try to replicate when I have some time and parts.



Cheers Hitman
Title: Re: General Talk
Post by: crazycut06 on July 15, 2012, 06:50:26 AM
@All,
 This motor is quite efficient, and the torque is powerful, wonder how the BEMF is cancelled or is it helping the motor?  UFO said there is no plasma sparks on his commutators.. Hmmm...nice!!!
Oopss it's been explained in the video   ;D perfect! Thank you for sharing UFOPOLITICS!
Title: Re: General Talk
Post by: Romero on July 15, 2012, 12:30:42 PM
This is a very important discovery, I hope people will realize how important that is, BEMF works for us and not against anymore, finally disclosed.

Romero
Title: Re: General Talk
Post by: landownunder on July 15, 2012, 02:00:32 PM
Hi romero you knew this all along my friend no need to hide it anymore
Title: Re: General Talk
Post by: Romero on July 15, 2012, 02:27:05 PM
Hi romero you knew this all along my friend no need to hide it anymore
There is much more to come. 'Ufopolitics' is a very clever guy, I just hope he knows how dangerous this game is.

Romero
Title: Re: General Talk
Post by: landownunder on July 17, 2012, 09:49:20 AM
looks like all the losers have made ufopolitics take down most of his info,  all that knowledge gone because of a few idiots   good news he is back posting at energeticforum





Title: Re: General Talk
Post by: landownunder on August 27, 2012, 03:08:25 PM
Anyone still alive no posts for awhile.

Hey romero expected to see a free energy machine by last christmas, still waiting i think you will have to release it. i remember you saying we will see a machine out by now?????????

maybe you can update us on the progress of who is closest . all the best ron
Title: Re: General Talk
Post by: Romero on September 12, 2012, 12:17:30 AM
Hi all,

long time since my last post here. I was in holiday for 6 weeks.
Kids had a wonderful time, I had to pay back for the time I am not spending with them.
Below few pictures with my favorite places.

Title: Re: General Talk
Post by: crazycut06 on September 12, 2012, 12:45:28 AM
A nice beautiful, peaceful, relaxing  place, i like nature  :D
Title: Re: General Talk
Post by: aaron5120 on September 12, 2012, 05:13:47 AM
Wow, that is a beautiful place for holidays. I wish I could flee to a place like this with my family before december 2012!
No place to hide. We are doomed by Planet X! :-[
Title: Re: General Talk
Post by: Romero on September 12, 2012, 03:38:39 PM
Wow, that is a beautiful place for holidays. I wish I could flee to a place like this with my family before december 2012!
No place to hide. We are doomed by Planet X! :-[
there are many places like that, I feel like a new person in the middle of nature, maybe because I was born there... but stress goes completely and you can feel your body charging with energy.

Romero
Title: Re: General Talk
Post by: Romero on September 12, 2012, 04:01:14 PM
same places but winter and of course Dracula's Castle
Title: Re: General Talk
Post by: aaron5120 on September 13, 2012, 05:31:30 AM
Thanks for posting the photos, I like the place, and is the castle now converted into a hotel?
We all missed Romero during these 6 weeks. And look forward to seeing your great contributions here both as the Moderator and main researcher.
aaron5120
Title: Re: General Talk
Post by: Romero on September 13, 2012, 10:06:35 AM
Thanks for posting the photos, I like the place, and is the castle now converted into a hotel?
We all missed Romero during these 6 weeks. And look forward to seeing your great contributions here both as the Moderator and main researcher.
aaron5120
Hi,

the castle is not a hotel, it is open just for visitors but always busy. Amazing to see the work inside hundreds of years old...
http://www.tripadvisor.co.uk/Attraction_Review-g295394-d318167-Reviews-or10-Bran_Castle_Dracula_s_Castle-Brasov_Brasov_County_Central_Romania_Transylvania.html#REVIEWS

Another interesting place to visit... check the pictures at the bottom of the page.
http://en.wikipedia.org/wiki/Sarmizegetusa_Regia

...and one of the biggest buildings in the world https://www.google.co.uk/search?q=palatul+parlamentului&hl=en&prmd=imvns&tbm=isch&tbo=u&source=univ&sa=X&ei=bqBRUOO0K6We0QXl2YGwDA&ved=0CEsQsAQ&biw=1680&bih=848


Romero
Title: Re: General Talk
Post by: aaron5120 on September 15, 2012, 04:58:27 AM
After viewing the more than 200 photos of the Castle, the pictures of the Dacian fortresses and santuaries, and finally, the Parlament Palace of Bucarest, I have to say, Romania is a country with a very rich cultural legacy.
Thank you Romero for introducing us to your great homeland. And by curiosity,  if there are any great scientists or suppressed inventors from Romania that we should know about?
aaron5120 :)
Title: Re: General Talk
Post by: Romero on September 15, 2012, 01:48:49 PM
After viewing the more than 200 photos of the Castle, the pictures of the Dacian fortresses and santuaries, and finally, the Parlament Palace of Bucarest, I have to say, Romania is a country with a very rich cultural legacy.
Thank you Romero for introducing us to your great homeland. And by curiosity,  if there are any great scientists or suppressed inventors from Romania that we should know about?
aaron5120 :)
Just a few link below.
http://en.wikipedia.org/wiki/George_Constantinesco
http://en.wikipedia.org/wiki/Coand%C4%83-1910
http://www.epmagazine.org/storage/166/en-tesla.aspx
http://peswiki.com/index.php/Directory:Karpen's_Pile_--_A_Battery_That_Has_Produced_Energy_Continuously_Since_1950s
http://www.greenoptimistic.com/2011/01/20/justin-capra-jetpack-inventor/
http://en.wikipedia.org/wiki/User:Bci2/Ionel_Solomon
http://en.wikipedia.org/wiki/Aurel_Vlaicu
http://www.antiaging-magazine.com/articles/article_10_1.html
 ...and many more.

Regards,
Romero
Title: Re: General Talk
Post by: Victor on September 26, 2012, 07:59:44 AM
Salut Romi,
Mă bucur să văd oameni ca tine, oameni care ?și prezintă țara și altfel, nu numai cum vor s-o vadă unii.
Și mare păcat că nu au observat acest lucru și mulți dintre conaționalii noștri. Observă mai degrabă acest lucru aaron5120, care probabil că nu este rom?n, și poate mulți alții care nu au auzit niciodată de Rom?nia.
Știu că ești un om modest și vei spune că te laud prea mult, dar totuși, acceptă că ăsta e adevărul.
Chiar, ... așa pentru satisfacerea curiozității mele... c?ți membrii de origine rom?nă ai ?nscriși pe site-ul tău? Mulți spun că Rom?nia este o țară săracă. Să fie oare sărăcia cea care nu ?i ??ndeamnă? pe mai mulți rom?ni să fie interesați de asemenea lucruri precum free energy? Sau unora dintre ei (din anumite motive), le place să tacă și facă? :)
Oricum ar fi, ai multă apreciere și respect din partea mea.

Victor
Title: Re: General Talk
Post by: Dave45 on September 26, 2012, 12:57:24 PM
Good to see you back around, I may not post here much but always watching and learning.
I try to keep my ramblings to a minimum here as this is more of a builders forum.
dave
Title: Re: General Talk
Post by: Romero on September 26, 2012, 01:10:40 PM
Salut Romi,
Mă bucur să văd oameni ca tine, oameni care ?și prezintă țara și altfel, nu numai cum vor s-o vadă unii.
Și mare păcat că nu au observat acest lucru și mulți dintre conaționalii noștri. Observă mai degrabă acest lucru aaron5120, care probabil că nu este rom?n, și poate mulți alții care nu au auzit niciodată de Rom?nia.
Știu că ești un om modest și vei spune că te laud prea mult, dar totuși, acceptă că ăsta e adevărul.
Chiar, ... așa pentru satisfacerea curiozității mele... c?ți membrii de origine rom?nă ai ?nscriși pe site-ul tău? Mulți spun că Rom?nia este o țară săracă. Să fie oare sărăcia cea care nu ?i ??ndeamnă? pe mai mulți rom?ni să fie interesați de asemenea lucruri precum free energy? Sau unora dintre ei (din anumite motive), le place să tacă și facă? :)
Oricum ar fi, ai multă apreciere și respect din partea mea.

Victor

Salutare,

multumesc pentru aprecieri. Ma bucura cand oameni de alta nationalitate vad si pot aprecia ceea ce incerc eu sa fac.
Poate am sa fac o sectiune aici in care sa putem posta orice este important si merita vazut.
Sunt departe de tara de multi ani si asta ma face sa apreciez mai mult locurile de unde provin, sa vad lucrurile asa cum sunt intr-adevar. Pe forum aici din cate cunosc eu sunt 4 romani dar cunosc foarte multi romani pe celelalte forum-uri. Aici am o comunitate de cateva sute de mii de romani, personal cunosc cateva mii. Am plecat din tara in momentul in care am vazut ca sistemul comunist inca este la putere, PSD, PNL, UDMR, PDL... toti aceasi mizerie cum spune DD, cred ca stii despre cine vorbesc. Imediat dupa revolutie am renuntat la servici (intretinere centrala telefonica) si am pornit ca multi altii diferite afaceri.
M-am straduit sa reusesc si sa ma mentin iar prin 1996 am intrat intr-un parteneriat cu o firma din Anglia si am inceput sa import diferite lucruri necesare in Romania acelor ani. Afacerea a mers bine un timp apoi ca de obicei in Ro aveam controale daca nu zilnice sigur saptamanal. La fiecare import cei de la vama veneau cu masinile sa isi ia tot ce poftesc, bineinteles ca fara a plati ceva.
Am ajuns la un moment dat sa nu ma mai duc sa fac vama ca preferau sa vina ei la mine la sediu pentru a le fi mai usor sa care tot ce voiau. Am inghitit un timp apoi a trebuit sa iau o decizie mai ales ca partenerul meu nu intelegea de ce trebuie sa 'cotizam' la alesii locali si cei de la vama. Am incercat cu multe sesizari, chiar am fost de cateva ori agresiv cu cei ce veneau in control, am folosit inregistrari, camere ascunse... pana la urma tot eu am fost cel care a trebuit sa renunte, nimeni din grupul de 'sugative' nu a patit nimic. Mi-am luat familia si am lasat totul in urma. Avantajul a fost ca aveam access sa intru in Anglia datorita parteneriatului meu cu firma din Anglia, dupa cum stii romanii nu aveau access sa calatoreasca sau sa se stabileasca...
Eu tot sper ca ceva sa se schimbe in sistemul din tara apoi sa imi fac bagajele si sa revin, la fel ca mine foarte multi altii.
Inima mea este tot acolo, la fel si familia mea. Copiii mei chiar daca sunt mai mult englezi decat romani iubesc Romania si de fiecare data cand mergem in concediu ma intreaba de ce ne mai intoarcem in Anglia. Pentru ei Anglia este ca o inchisoare mai ales Londra datorita riscurilor si nesigurantei la care sunt expusi, iar eu nu imi permit sa ii las sa mearga nicaieri neinsotiti pe cand in tara pleaca dimineata si mai vin acasa cand le este foame.
Romania nu este saraca deloc dar are un grup de capuse care o sug continuu, fara aceste capuse lucrurile vor putea fi schimbate total.
In curand avem alegeri din nou, sa vedem daca oamenii vor vota pe aceeasi hoti.
Romania a dat umanitatii foarte multi oameni care au adus contributii majore omenirii.
Free Energy... sigur ca exista, nu chiar free pentru ca nu putem intotdeauna sa identificam sursa, dar neplatind pentru ea putem sa o numim free.

O zi buna si success,
Romero
Title: Re: General Talk
Post by: Romero on September 26, 2012, 01:12:52 PM
Good to see you back around, I may not post here much but always watching and learning.
I try to keep my ramblings to a minimum here as this is more of a builders forum.
dave
Hi Dave,

good to see you too :)
I prefer no postings than unlimited talk, hate or ignorance.

Have a nice day,
Romero
Title: Re: General Talk
Post by: Victor on September 26, 2012, 03:06:04 PM

Eu nu cred că vom avea să vedem ceva nou ?n cur?nd ?n Rom?nia dec?t ?aceeași Mărie, dar cu altă pălărie?. La noi se pare că numai timpul va rezolva lucrurile. Iar starea generală a lucrurilor de aici pare să nu fie dependentă numai de mentalitatea rom?nului, ci și de ?ceva din exterior?.
C?nd spui că Rom?nia a dat umanității foarte mulți oameni care au adus contribuții majore omenirii, sunt foarte de acord cu tine. Iar Free Energy... consider că este o denumire improprie, nimic nu este free, totul este Energie. Și dacă putem spune că această energie se poate obține din nimic, atunci și acest nimic ?nseamnă Ceva.  :) sau așa cum spunea odată mai demult Floyd Sweet, ?NOTHING IS SOMETHING? și avea multă dreptate. Noi cu toții, și tot ce ne ?nconjoară, ne ?scăldăm? ?ntr-un ocean de Energie. Referitor la acest lucru, și dacă ai timp, citește această carte http://www.scribd.com/doc/106459474/Lytle-W-Robinson-Edgar-Cayce-Despre-Originea-și-Destinul-omului scrisă prin anul 1971 de un anume Lytle W. Robinson. Vezi ?n mod special pag. 23, 24 și 31 și te rog să fii ?nțelegător cu engleza mea, pentru că pe timpul școlii m-au ?umflat? numai de rusă  :)

Victor
Title: Re: General Talk
Post by: aaron5120 on September 27, 2012, 04:29:07 AM
Victor, and Romero,
I enjoyed reading the exchange between you two about Romania. And to a certain extend, I identify myself to you Romero, as I am also an expatriate too. I was born in Latin America, of Chinese origin. After 19 years living and working in Costa Rica, I went back to Hong Kong, where I was raised up during my childhood.
I did go back with my family from time to time to my homecountry: CR. But things there are just like Romania: an endless corruption of the government officials that is eating up the nation's economy. And the big boys do not want to loose the grip. They just place some Pinochos as candidates, into political elections for people to vote once every 4 years. And keep stealing the country's resource. The customs is similar to Romania with their bribery demands and inefficiencies.
I was fed up with this. Now I live with my CR wife and my son in Hong Kong permanently.
I am 54 and almost retired. Not having to worry about my day job, I just dedicate my time to inquiring of the Free Energy projects. Certainly, this kind of devices is not free, they cost money to be built. But, as you say, while we do not have to pay for it continuously, we can deem it as free energy.
I am preparing for the coming Killshots, as introduced by Ed Dames et al. And yet there is not any reliable power generation solution for an average individual citizen to counter and survive the coming disaster. Meanwhile time is running out......
Title: Re: General Talk
Post by: Romero on September 27, 2012, 09:31:23 AM
@aaron5120
...but my hope is still strong regarding my home country.
UK has lots of similar problems too, just few examples: Few year back Romania joined EU comunity together with many other countries, that means that citizens from these countries are free to travel to any other EU country also to be able to work in any of those countries.
Well, big surprise Romanians and Bulgarians got permisions to free travel but not the right to work unless you ask for permision and many times permision is not granted.
This is not the case for all other countries, they can just come and start working just like an UK citizen.
Another example is regarding kids in school, most of the kids are getting free school meal, free access to after school clubs but surprise again, for us is not the same, we must pay for everything. I will totally understand any of these for the british citizens but why such discriminations? Is this the country where democracy is on top of the list? People from some countries are required not to work at all, just relax home and you will get everything you need, including free house, free pocket money... isn't that amazing?
On the other side british people are struggling to get access to a council house in case they need it.
I know people whe are in UK for more than 10 years and NEVER had a job, no contribution for taxes or anything while I have to pay taxes and contribute in every possible way, I wonder how do the british people feel about that.
The list is very long, I could write here all day... and all these from a country where democracy should be at the highest level.

Now my friend, what can we say about our countries... we have to wait  few more generations to get to a different standard and even then... who knows, I still hope for better.

Best regards,
Romero
Title: Re: General Talk
Post by: Victor on September 27, 2012, 09:45:38 AM
Victor, and Romero,
I enjoyed reading the exchange between you two about Romania. And to a certain extend, I identify myself to you Romero, as I am also an expatriate too. I was born in Latin America, of Chinese origin. After 19 years living and working in Costa Rica, I went back to Hong Kong, where I was raised up during my childhood.
I did go back with my family from time to time to my homecountry: CR. But things there are just like Romania: an endless corruption of the government officials that is eating up the nation's economy. And the big boys do not want to loose the grip. They just place some Pinochos as candidates, into political elections for people to vote once every 4 years. And keep stealing the country's resource. The customs is similar to Romania with their bribery demands and inefficiencies.
I was fed up with this. Now I live with my CR wife and my son in Hong Kong permanently.
I am 54 and almost retired. Not having to worry about my day job, I just dedicate my time to inquiring of the Free Energy projects. Certainly, this kind of devices is not free, they cost money to be built. But, as you say, while we do not have to pay for it continuously, we can deem it as free energy.
I am preparing for the coming Killshots, as introduced by Ed Dames et al. And yet there is not any reliable power generation solution for an average individual citizen to counter and survive the coming disaster. Meanwhile time is running out......

Hi aaron5120,
I will understand you and Romi. And I do not agree with this scheme that we "require" to leave the places where we were born and lived. I am currently unemployed, 47 ages, my wife works for a miserable salary, have two children, but I would not be able to go away from here where I was born. I was horrified when I found out what trough passed Romi lived here in Romania and I am sorry to know that almost everywhere is about the same situation. If I could joke, to make fun of trouble, I would say that the earth is like a balloon, a ballon that is strangled every day that passes. Belt tighten, and tighten ever more, until when in one day the ballon will explode. And you're right, time is running out.... and unfortunately that whoever needs to see it, does not see.
Please forgive me for my poor English.
Victor
Title: Re: General Talk
Post by: Victor on September 27, 2012, 09:46:48 AM
?mi place cum g?ndești Romi. SPERANȚA MOARE ULTIMA :)
Title: Re: General Talk
Post by: Hitman on October 03, 2012, 05:43:21 PM
There are many beautiful places on OUR HOME  ;)

Cheers Hitman
Title: Re: General Talk
Post by: Victor on October 06, 2012, 07:27:10 AM
There are many beautiful places on OUR HOME  ;)

Cheers Hitman

You are right Hitman. Everywhere are beautiful places, but beauty depends on the eyes who appreciates.  ;)
All the best to you and to everyone.
Title: Re: General Talk
Post by: crazycut06 on October 16, 2012, 02:37:21 PM
Hi all,
A little help pls. I'm having problem opening overunity.com site, it say's forbidden? What's happening? Is it only me? Sorry for posting this here, don't have any other place to ask... Thanks!
Title: Re: General Talk
Post by: kEhYo77 on October 16, 2012, 07:14:19 PM
The same here... '403 Forbidden'. I guess the fault is on their site. Maybe a hacker attack ;)
Title: Re: General Talk
Post by: Romero on October 16, 2012, 09:53:03 PM
The same here... '403 Forbidden'. I guess the fault is on their site. Maybe a hacker attack ;)
I believe is the hosting provider (Servage).
I used to host few websites for my customers with them and I had simillar problems. It can also be that the site is under an update.

Romero
Title: Re: General Talk
Post by: crazycut06 on October 16, 2012, 09:58:00 PM
Thanks Romero & kEhYo77, just a little bit worried... :-\
Title: Re: General Talk
Post by: crazycut06 on October 18, 2012, 11:52:31 AM
Nice Add-on Romero with this language selection many can easily read with their own native language  ;)
Title: Re: General Talk
Post by: Romero on October 18, 2012, 12:00:40 PM
Nice Add-on Romero with this language selection many can easily read with their own native language  ;)
I hope other forums will do the same, it's just a small addon. Translations are quite good.
Realtime Energy Chat at the top of the forum is very useful and can be used even without registration, just username and login. People can also register to protect their username being used by others.

Romero
Title: Re: General Talk
Post by: Victor on October 19, 2012, 08:44:20 AM
Chiar Romi, bună treabă ai făcut cu acest add-on.
Title: Re: General Talk
Post by: Victor on October 19, 2012, 09:01:07 AM




Probabil că știi de asta Ro, și este la fel de probabil ca secretul să se afle pe aici pe undeva http://www.svpvril.com/, dar totul e destul de stufos și de complex (și ?n plus cineva ?l ține la mare secret) :)
Title: Re: General Talk
Post by: Victor on October 19, 2012, 09:22:12 AM
Title: Re: General Talk
Post by: Hitman on October 23, 2012, 03:34:23 PM
Nice Add-on Romero with this language selection many can easily read with their own native language  ;)
I hope other forums will do the same, it's just a small addon. Translations are quite good.
Realtime Energy Chat at the top of the forum is very useful and can be used even without registration, just username and login. People can also register to protect their username being used by others.

Romero

@romero
Are you hosting the chat server ?
Title: Re: General Talk
Post by: Romero on October 23, 2012, 06:45:33 PM
@Hitman
yes, I am hosting it.
Romero
Title: Graphene Super Capacitor
Post by: Hitman on October 24, 2012, 03:16:59 PM
Has any one heard of graphene super capacitors ?

Title: Re: Graphene Super Capacitor
Post by: Wings on October 24, 2012, 10:18:19 PM
Has any one heard of graphene super capacitors ?



http://hackadaycom.files.wordpress.com/2012/03/el-kady-som.pdf

http://hackaday.com/2012/03/20/print-your-own-supercaps/
Title: Re: General Talk
Post by: Hitman on November 09, 2012, 03:13:42 PM
This is fantastic if the dude can make us a schematic.

&feature=colike